Keithley 7077, Инструкция по эксплуатации

Страница: 18 / 62

Operation
2-5
BNC connector identification is provided in Figure 2-6. Each
BNC connector is internally connected to the adjacent corre-
sponding row or column.
Cable connections
Available Keithley cables and connectors for customized
user supplied terminations are summarized in Table 2-2.
WARNING
To avoid electrical shock that could re-
sult in injury or death, ALWAYS remove
power from the entire system (Model
707 or 708, test instruments, DUT, etc.)
and discharge any capacitors before
connecting or disconnecting cables from
the matrix card.
2.4 Connections
CAUTION
To prevent damage (not covered by the
warranty), do not exceed the maximum
allowable limits of the Model 7077.
Maximum signal levels are listed in the
specifications located at the front of the
manual.
All rows and columns of the Model 7077 Matrix Card are
connected to the BNC connectors mounted on the rear panel
of the matrix card when shipped. One receptacle is provided
for each row connection (rows A through H) and one for each
column connection (columns 1 through 12).
Figure 2-6
BNC connector identification
B
A
C
D
E
F
G
H
1
2
3
4
5
6
7
8
9
10
11
12
1 2 3 4 5 6 7 8 9 10 11 12
A
B
C
D
E
F
G
H
ROWS
COLUMNS
Model 7077