manualshive.com logo in svg

Keithley 7077, Инструкция по эксплуатации

Поделиться
Скачать
Keithley 7077 Скачать руководство пользователя страница 53

 

5

 

Replaceable Parts

 

5-1

 

5.1

Introduction

 

This section contains replacement parts information, sche-
matic diagrams, and component layout drawings for the
Model 7077.

 

5.2

Parts list

 

The parts list for the Model 7077 is included in tables inte-
grated with the schematic diagram and component layout
drawing. Parts are listed alphabetically in order of circuit
designation.

 

5.3

Ordering information

 

To place an order, or to obtain information concerning re-
placement parts, contact your Keithley representative or the
factory (see the inside front cover for addresses). When or-
dering parts, be sure to include the following information:

• Card model number (7077)

• Card serial number

• Part description

• Circuit description, if applicable

• Keithley part number

 

5.4

Factory service

 

If the card is to be returned to Keithley Instruments for repair,
perform the following:

• Call the Repair Department at 1-800-552-1115 for a

Return Material Authorization (RMA) number.

• Complete the service form at the back of this manual

and include it with the card.

• Carefully pack the card in the original packing carton.

• Write ATTENTION REPAIR DEPARTMENT and the

RMA number on the shipping label.

 

NOTE

 

It is not necessary to return the switching
mainframe with the card.

 

5.5

Component layout and schematic 
diagram

 

A component layout drawing and schematic diagram are in-
cluded on the following pages integrated with the parts list.

Содержание 7077































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды