Keithley 7065, Инструкция по эксплуатации

Страница: 15 / 155

PA-392 Rev. C / July 2009 4 of 21
1. From normal display, press the Model 7001 CARD CONFIGURATION key.
2. Select TYPE, then press ENTER.
3. Select SLOT-1 (or SLOT-2 if the card is installed in that slot), then press ENTER.
4. Using the cursor keys, scroll through the card types until the unit displays the Model 7065 card as follows:
SLOT-1 CARD: 7065
5. Press ENTER to complete card type configuration.
6. Press EXIT twice to return to normal display.
NOTE
The #-OF-POLES and CARD-PAIR selections in the card configuration menu do not
apply to Model 7065 operation. Although you can set the DELAY parameter, the
delay should normally be set to zero when using the Hall Effect Card. Refer to the
Model 7001 Instruction Manual for more information on the delay parameter.
6. Front Panel Operation
The following paragraphs provide a brief overview on controlling the Model 7065 card from the front panel of the
Model 7001 mainframe. For detailed front panel operation, refer to the Model 7001 Instruction Manual.
Channel Status Display
Figure 2 shows the basic format for Model 7065 channel (crosspoint) display. A three-integer format is used to
express channel (crosspoint) assignments. The first (left) integer is the slot number in which the card is installed.
Thus, a “1” indicates Slot 1 (CARD 1), and “2” designates Slot 2 (CARD 2). The second (middle) integer designates
the row number, 1 through 4. The top row is Row 1, the second from the top is Row 2, the next row is Row 3, and
the bottom row is Row 4. The third (right) integer identifies the column. The five matrix columns for each card are
shown on the channel status display.
Examples:
Channel 1!2!3 (Slot 1, Row 2, Column 3)
Channel 2!3!4 (Slot 3, Row 3, Column 4)
Figure 2: Model 7065/7001 Channel (Crosspoint) Display Assignments