Keithley 7065, Инструкция по эксплуатации

Страница: 14 / 155

PA-392 Rev. C / July 2009 3 of 21
Figure 1: Installing the Model 7065 Hall Effect Card in the Model 7001 Switch System
Card Removal
To remove the card, first unlock it by pulling the ejector arms outward, then pull the card out of the mainframe. Store
the card in its anti-static bag to avoid possible damage during storage.
5. Card Configuration
The Model 7001 must be properly configured so that it can recognize the Model 7065 card. Follow the steps below
to configure the mainframe for use with the Model 7065: