Keithley 7037, Инструкция по эксплуатации

Страница: 14 / 72

1
General Information
1-1
Introduction
This section contains general information about the Model
7037 single-pole relay-digital I/O card.
The Model 7037 consists of a multi-pin (mass termination)
connector card and a relay card. External test circuit connec-
tions are made via the 96-pin male DIN connector on the
connector card. Keithley offers a variety of optional accesso-
ries that can be used to make connections to the connector
card. (See the available accessories at the end of this section.)
The rest of Section 1 is arranged in the following manner:
• Features
• Warranty information
• Manual addenda
• Safety symbols and terms
• Specifications
• Unpacking and inspection
• Repacking for shipment
• Optional accessories
Features
The Model 7037 has 30 independent channels of single-pole
switching. It also has ten independent inputs and outputs for
digital I/O capabilities. Some of the key features include:
• Low contact potential and offset current for minimal
effects on low-level signals.
• High density switching and control.
• High capacity digital output sink of 250mA.
• 1A pathway current carrying capacity.
• High isolation resistance >1G
Ω for minimal load
effects.
• Model 7011-KIT-R connector kit that includes a 96-pin
female DIN connector that will mate directly to the con-
nector on the Model 7037 or to a standard 96-pin male
DIN bulkhead connector (see Model 7011-MTR). This
connector uses solder cups for connections to external
circuitry and includes an adapter for a round cable and
the housing.