Keithley 7035, Инструкция по эксплуатации

Страница: 60 / 74

6
Replaceable Parts
6-1
Introduction
This section contains replacement parts information, sche-
matic diagrams, and component layout drawings for the
Model 7035.
Parts lists
Parts lists for the various circuit boards are included in tables
integrated with schematic diagrams and component layout
drawings for the boards. Parts are listed alphabetically in
order of circuit designation.
Ordering information
To place an order, or to obtain information concerning
replacement parts, contact your Keithley representative or
the factory (see inside front cover for addresses). When
ordering parts, be sure to include the following information:
1. Card model number 7035
2. Card serial number
3. Part description
4. Circuit description, if applicable
5. Keithley part number
Factory service
If the card is to be returned to Keithley Instruments for repair,
perform the following:
1. Complete the service form at the back of this manual
and include it with the card.
2. Carefully pack the card in the original packing carton or
the equivalent.
3. Write ATTENTION REPAIR DEPT on the shipping
label.
NOTE
It is not necessary to return the mainframe
with the card.
Component layouts and schematic
diagrams
Component layout drawings and schematic diagrams are
included on the following pages integrated with the parts
lists:
Table 6-1 — Parts List, Relay Card for Model 7035.
7035-100 — Component Layout, Relay Card for Model
C7035.
7035-106 — Schematic, Relay Card for Model 7035.
Table 6-2 — Parts List, Mass-Terminated Connector Card
for Model 7035.
7035-170 — Component Layout, Mass-Terminated Con-
nector Card for Model 7035.
7035-176 — Schematic, Mass-Terminated Connector Card
for Model 7035.
Table 6-3 — Parts List, Model 7011-KIT-R 96-pin Female
DIN Connector Kit.