manualshive.com logo in svg
background image

A Tektronix Company

LO

W L

E

V

E

L M

E

A

S

U

R

E & S

O

U

R

C

E

6521 SPECIFICATIONS

CHANNELS PER CARD:

 10.

FUNCTIONS:

 Amps.

CONTACT CONFIGURATION:

 Single pole, “break-before-

make” for signal HI input. Signal LO is common for all 10 
channels and output. When a channel is off, sig  nal HI is 
connected to signal LO. 

CONNECTOR TYPE:

 Inputs BNC, Outputs Triaxial.

SIGNAL LEVEL:

 30V, 500mA, 10VA (resistive load). 

CONTACT LIFE:

 >10

6

 closures at maximum signal level; 

>10

7

 closures at low signal levels.

CONTACT RESISTANCE:

 <1

Ω

.

CONTACT POTENTIAL:

 <200µV.

OFFSET CURRENT:

 <1pA (<30fA typical at 23°C, <60% 

RH).

ACTUATION TIME:

 2ms. 

COMMON MODE VOLTAGE:

 <30V peak. 

ENVIRONMENT:

 

Operating:

 0° to 50°C up to 35°C at 70% 

R.H. 

Storage:

 –25° to 65°C.

6522 SPECIFICATIONS

CHANNELS PER CARD:

 10.

FUNCTIONS:

 Volts, Amps.

CONTACT CONFIGURATION:

 Single pole, “break-before-

make” for signal HI input. Signal LO is common for all 10 
channels and output. When a channel is off, signal HI is 
connected to signal LO. 6517B can also configure chan-
nels as voltage switches. 

CONNECTOR TYPE:

 Inputs: Triaxial. Outputs: Triaxial.

SIGNAL LEVEL:

 200V, 500mA, 10VA (resistive load). 

CONTACT LIFE:

 >10

6

 closures at maximum signal level; 

>10

7

 closures at low signal levels.

CONTACT RESISTANCE:

 <1

Ω

.

CONTACT POTENTIAL:

 <200µV.

OFFSET CURRENT:

 <1pA (<30fA typical at 23°C, <60% RH).

CHANNEL ISOLATION:

 >10

13

Ω

, <0.3pF.

INPUT ISOLATION:

 >10

10

Ω

, <125pF (Input HI to Input LO).

ACTUATION TIME:

 2ms. 

COMMON MODE VOLTAGE:

 <300V peak.

ENVIRONMENT:

 

Operating:

 0° to 50°C up to 35°C at 70% 

R.H. 

Storage:

 –25° to 65°C.

OUT

H

L

H

L

IN 1

H

L

IN 10

IN

 2...9

G

OUT

H

L

H

L

IN 1

H

L

IN 10

IN

 2...9

G

G

G

6517B

Electrometer/High Resistance Meter

Accessories Extend 

Measurement Capabilities

A variety of optional accessories can be used to 

extend the 6517B applications and enhance its 

 performance.
The 8009 Resistivity Chamber is a guard ed test 

fixture for measuring vol ume and sur face resis-

tivities of sam ple mat er ials. It has stain less-steel 

elec trodes built to ASTM stan   dards. The fixture’s 

elec trode dimensions are pre- programmed into 

the 6517B, so there’s no need to calculate those 

values then enter them man ually. This accessory 

is designed to protect you from contact with 

potentially hazardous voltages —opening the 

lid of the cham ber automatically turns off the 

6517B’s volt age source.

6521 and 6522 Low Current, 10-Channel 

Scanner Cards

Two optional 10-channel plug-in scanner 

cards are available to extend the measurement 

performance of the 6517B Electrometer/High 

Resistance Meter. The cards install directly into 

the option slot in the back panel of the 6517B. 

The cards are also compatible with the 6517A 

and 6517.
The 6521 Low Current Scanner Card is a 

10-channel multiplexer, designed for switching 

low currents in multipoint testing applications 

or when the test configuration must be changed. 

Offset current on each channel is <1pA and high 

isolation is maintained between each channel 

(>10

15

Ω

). The 6521 main tains the current path 

even when the channel is deselected, making it a 

true current switch. BNC input con nectors help 

provide shielding for sensitive measurements 

and make the card compatible with low noise 

co axial cables. The 6521 is well suited for auto-

mating reverse leakage tests on semiconductor 

junc  tions or gate leakage tests on FETs.
The 6522 Voltage/Low Current Scanner Card can 

provide up to ten channels of low-level  current, 

high   impedance voltage, high resistance, or 

charge switching. Although it’s similar to the 

6521 in many ways, the 6522’s input connectors 

are 3-lug triax. The card can be software con-

figured for high im  pe dance voltage switching of 

up to 200V. Triaxial connectors make it possible 

to float the card 500V above ground and drive 

guard to 200V.

8009 Resistivity Chamber is compliant with 

American Society for Testing and Materials 

(ASTM) Standard D 257 Standard Test 

Methods for DC Resistance or Conductance 

of Insulating Materials. The 8009 combined 

with the 6517B provides a complete system 

for making high quality, safe resistivity meas-

urements.

65

17

B E

le

ct

rome

te

r/

H

ig

h R

es

is

ta

nc

e M

et

er

Отзывы: