Section 4
:
Frequently Asked Questions
Series 3700 System Switch/Multimeter Quick Start Guide
4-18
Document Number: 3700S-903-01 Rev. A / August 2007
USB: With TSB installed, the USB driver aspects will installed when USB cable from unit is
plugged into PC. Once connected, USB0 option for device will appear in list when select
Open Instrument choice. If not there initially, use the instrument console to add one as
follows:
a)
Menu (arrow down icon)
b)
Select Instrument option.
c)
Select Configure.
d)
Select Add operation.
e)
Select USB instrument on next screen.
f)
Select USB choice shown.
g)
Click Finish.
h)
Go back and open instrument. USB0 will now be in the list.
3. If you select the Simulate option, the Instrument Console will become active even though
there will be no actual communication with the Series 3700. You can simulate running a
script or sending a command, but the Series 3700 will not respond.
4. To close the resource, click on the Instrument icon again. The resource will close, and the
console window will become inactive.
Step 3: Save and clear console window
You can save and clear the console window as follows:
Save console:
Click on the Menu arrow, choose Save Console, then choose the folder
and filename desired.
Clear console:
Click on the Clear Console icon to clear the console window.
Step 4: Select command and language reference views
You can access online help for the ICL (Instrument Control Library) and TSL (Test Script
Language) as follows:
ICL:
Click on the Command Help tab at the top, then click the Maximize icon. You can
then quickly get information on all commands in the library.
TSL:
Click on the Language Help tab at the top, then click the Maximize icon to quickly
access details on the script language.
Содержание 3706
