Keithley 3706, Быстрый старт

Страница: 22 / 73

Series 3700 System Switch/Multimeter Quick Start Guide Section 2 : Using the Front Panel
Document Number: 3700S-903-01 Rev. A / August 2007 2-7
Operation keys
CHAN key: Pressing this key opens the CHANNEL ACTION MENU that contains the
following menu items: OPEN, CLOSE EXCLOSE, EXSLOTCLOSE, and
RESET.
PATT key: Pressing this key opens the PATTERN ACTION MENU that contains the
following menu items: OPEN, CLOSE, EXCLOSE, EXSLOTCLOSE,
CREATE, VIEW, DELETE, and RESET.
SLOT key: Press this key to display installed card(s) and instrument information, as well
as main system information. The information displayed includes firmware
revisions of both main and installed components. After pressing this key,
scroll through all available instruments, including the internal DMM.
SCAN key: If a scan list is present, this key opens the SCAN ACTION MENU that
contains the following menu items: EXECUTE, CREATE, LIST, CLEAR, and
RESET.
DMM key: Opens the DMM ACTION MENU that contains the following menu items:
MEASURE, COUNT, LOAD, SAVE, OPEN, CLOSE, RESETFUNC,
RESETALL, and CONNECT.
LIMIT key: Pressing this key will cycle through the four combinations of limit state
settings (Limit1 and Limit2 off, Limit1 on and Limit2 off, Limit1 off and Limit2
on, Limit1 and Limit2 on).
REL key: Pressing this key enables/disables relative for selected function. Causes REL
annunciator to light when enabled. Also see Relative in the reference manual.
FILTER key: Pressing this key enables/disables filter for selected function. When the filter
is enabled, the FILT annunciator will light. Also see Filter in the reference
manual.
FUNC key: Pressing this key selects the active DMM function for the channel. Related
ICL command: dmm.func
LOAD key: Pressing this key loads user-defined scripts, along with Lua chunks added
with display.loadmenu.add for execution. This key opens the LOAD TEST
menu which contains the following menu items: USER and SCRIPTS.
RUN key: Pressing this key runs last selected script or load menu item.
INSERT key: Pressing this key appends the present channel to the scan list.
DELETE key: Pressing this key deletes the present channel (including function) from the
scan list. If the present channel is not contained in the scan list, no error is
reported.
TRIG key: Pressing this key triggers a measurement equivalent to the dmm.measure
command.
MENU key: Pressing this key opens the MAIN MENU that contains the following menu
items: SCRIPT, SETUP, GPIB, LAN, TSPLINK, UPGRADE, CHANNEL,
DISPLAY, DIGIO, BEEPER, and SYSTEM-INFO.
EXIT key: Cancels the selection and moves back to the measurement display.
ENTER key: Pressing this key accepts selection, moves to next choice, or back to
measurement display.