Example: Combine I1+I2 in parallel
To combine channel 1 and channel 2 when the outputs
are wired in parallel:
1. Connect the outputs in parallel as shown.
2. Press the
Menu
key.
3. Use the arrow keys to select
Combine
.
4. Press the
Enter
key.
5. Press the down arrow key to select
I1+I2 Parallel
.
6. Press the
Enter
key. The screen returns to meter mode.
Verify that the Para indicator is displayed, replacing the
channel 2 voltage and current readings. This indicates
that the power supply is in the I1+I2 parallel state. The
total output current is displayed on channel 1.
7. Set channel 1 to the current value you want.
Turn off combine
To turn off the combine function:
1. Remove all connections to the output terminals.
2. Press the
Menu
key.
3. Use the arrow keys to select
Combine
.
4. Press the
Enter
key.
5. Press the down arrow key to select
Combine Off
(default)
.
6. Press the
Enter
key.
