5. Disconnect any devices under test (DUTs) from the
instrument before turning the instrument on.
6. Turn on the instrument by pressing the
POWER
switch
on the front panel to the on (|) position.
To power on the 2230-30-6 or 2230-60-3 instrument in
the European Union:
When using the Model 2230-30-6 or 2230-60-3 in a country
that is a member of the European Union, you need to use
the 2230G-HRM in line with the mains power cord to comply
with European Union regulations, as shown in the following
diagram.
1. Make sure the front-panel power switch is in the
(0) position.
2. Properly set the 110 V/220 V selector switch on the
bottom of the instrument.
3. Connect the female end of the supplied line cord to the
ac receptacle on the rear panel.
4. Connect the plug of the supplied line cord to the ac
output of the 2230G-HRM inductor.
5. Connect the female end of the supplied power cord to
the ac input of the 2230G-HRM inductor.
6. Connect the plug of the power cord to a grounded
ac outlet.
7. Disconnect any devices under test (DUTs) from the
instrument before turning the instrument on.
8. Turn on the instrument by pressing the
POWER
switch
on the front panel to the on (|) position.
AC receptacle
Line cord
(30 cm (11.81 in.))
AC output
AC input
AC outlet
Power cord
2220G-HRM
