06
INSTALLATION INSTRUCTIONS
TRIPLE TRAINER
TOOLS AND MATERIALS
INSTALLATION
Remove the bolts that fasten the Triple Trainer to the shipping pallet
using a 3/8 in. Socket and Ratchet.
HEAVY EQUIPMENT:
The Floor-mounted Triple Trainer weighs 350 lbs (159 kg). Help is required when handling the Triple
Trainer to prevent potential muscle strain and/or back injury.
CRUSH HAZARD:
Keep feet clear when sliding the Triple Trainer off the pallet.
IMPORTANT:
Ensure that the mount area has been planned according to the training space required (refer to the “Training
Space” section, page 4).
UNPACKING
Figure 3.
Unpacking the Triple Trainer
Safety
Glasses
High-Quality Floor/Wall
Scanner (recommended)
Tape
Measure
Hammer Drill
with Dust Collection System
3/8x6-in. Masonry Bit
HEPA
Vacuum
3/8 in.
Socket and Ratchet
#3 Phillips
Screwdriver
3/16 in. (5 mm)
Allen Wrench
Adjustable
Wrench
9/16 in.
Socket and Ratchet
Torque Wrench
9/16 in. Socket
Wire
Tube Brush
Drill with 1-inch Hole Saw
(recommended for
covered floors)
NOTE: Functional Trainers may be
bolted to the pallet individually
Slide Triple Trainer to
planned mount area
Grip at Arms
Cutters
