ASSEMBLY INSTRUCTIONS
3110XX
8-foot ceiling
3111XX
9-foot ceiling
Height Clearance
96 in
(2,439 mm)
108 in
(2,743 mm)
Footprint (DxW)
103 in x 71 in
(2,616 mm x 1,804 mm)
Insert Platform
configuration (DxW)
108 in x 71 in
(2,743 mm x 1,804 mm)
Olympic Lifting
Insert Platform
configuration (DxW)
183 in x 100 in
(4,648 mm x 2,540 mm)
Free Space
around Equipment
(recommended)
*Multiple Racks may share side Free Space.
INSTALLATION REQUIREMENTS
Note to Installer:
Be sure to leave Assembly Instructions with the customer.
Note to Customer:
Keep Assembly Instructions for future reference.
Skill level:
Professional installation is required by qualified personnel.
Product failure due to improper installation is not covered under warranty.
READ CAREFULLY. KEEP THESE INSTRUCTIONS.
KEISER CORPORATION
2470 S. Cherry Ave.
Fresno, CA 93706
CUSTOMER SUPPORT
If you have any questions regarding the
Assembly Instructions
after reading this guide, contact Keiser Customer Support:
1 559 256 8000
Keiser, the Keiser logo, and other trademarks associated with Keiser products referred to in this publication are trademarks of Keiser Corporation.
© Copyright 2020, Keiser Corporation. All rights reserved.
Distribution and copying of this document, use and communication of its contents is not permitted without written authorization from Keiser Corporation. The content
of this document is furnished for informational use only, may be subject to change without notice, and should not be construed as a commitment by Keiser Corporation.
Every effort has been made to ensure that the information in this manual is accurate. Keiser Corporation is not responsible for printing or clerical errors.
315502_A
POWER RACK
KEISER STRENGTH
MODELS 3110XX, 3111XX
3111XX model
Verify planned equipment location is
a solid, level, and structurally
sound surface and
meets the following dimensions criteria:
72 inches
(1,829 mm)
Sides*
48 inches
(1,219 mm)
Front
12 inches
(305 mm)
Rear
