RAPT Pill Hydrometer & Thermometer Quick Start Guide
Page
16
of
18
Last Updated 6/05/2022 16:49 PM
You can also check by navigating to
Diagnostics
and checking that it shows your networks IP address
next to
IP (STA).
To connect your RAPT Pill to your home Wi-Fi network, see
Connecting the RAPT Pill to your Home
Check the signal strength
If your RAPT Pill is connected to your home Wi-Fi network and there is no telemetry being received
check that your RAPT Pill has a good signal strength in the area/vessel/chamber you are fermenting
in.
To check the signal strength, log in to the RAPT Portal and click on the
information symbol
below
your RAPT Pill on the dashboard.
Signal strength is represented on a scale of 0 to -100dbm
Signal Strength (dBm)
What it means
0 to -30dBm
Maximum signal
-50dBm
Excellent signal
-67dBm
Good, reliable signal
-70dBm
Ok, not a strong signal
-80dBM
Poor, unreliable signal
-90dBM
Unusable
Re-Register Your RAPT Pill
If your RAPT Pill is still not sending telemetry despite being connected to Wi-Fi and with a good,
reliable signal strength then you may need to re-register your RAPT Pill to your account. To re-
register your RAPT Pill do not delete the device from the RAPT Portal, instead follow the steps
below:
1.
Connect the Pill via USB-C cable. Open the Pill Captive Portal on your smart phone or tablet.
(See
Opening the RAPT Pill Captive Portal
).
2.
Go to the
Registration
tab in your Pill Captive Portal.
3.
Click the
Clear Registration
button, and wait a couple of seconds for a new
User Code
to be
generated.
4.
In a separate device, open and sign in to the RAPT Portal (
).
5.
Click on the
Edit
button of the RAPT Pill that you wish to re-register.
6.
Go to the
Troubleshooting
tab.
7.
Click the
Reset Device Authentication
button.
