RAPT Pill Hydrometer & Thermometer Quick Start Guide
Page
14
of
18
Last Updated 6/05/2022 16:49 PM
Updating Firmware
Your RAPT Pill will automatically check and install for firmware updates when plugged in to USB
power with a USB-C cable (not supplied).
To check the firmware on your Pill, plug the Pill in with a USB-C cable then open the Pill Access Portal
by connecting to the Access Point on your phone or tablet or through the Pill IP address.
1.
Plug your Pill in to USB power with a USB-C cable.
2.
Connect to the Pill Access Portal with your phone or tablet or through the Pill IP address.
3.
Navigate to the
Diagnostics
page.
4.
Check that your Pill is running the latest firmware.
5.
If a firmware update is available, this will be updated automatically when the Pill is plugged
in to USB with a USB-C cable (not supplied).
6.
To check and update manually in the event that this is not up to date, press the
DO OTA
UPDATE
button. Your device will automatically download and update the most current
available firmware.
