Thermentor King User Manual
Page 11 of 16
Keg King is a registered business name of MCH Australia Pty Ltd
Connecting to the Fermenter
1.
Connect the coolant lines from the
coolant connections
on the Thermentor King to the
fermenter Cooling Coil
2.
Connect the temperature sensor cable to the
sensor connection
on the unit.
3.
Insert the temperature sensor into the fermenter thermowell. If the fermenter does not
have a thermowell, you can tape the sensor to the outside of the fermenter, preferably
below the beer/wort level
4.
Ensure the Insulating Jacket fully encloses the vessel, especially at the bottom.
