Thermentor King User Manual
Page 13 of 16
Keg King is a registered business name of MCH Australia Pty Ltd
9.
Keep topping up the coolant until the level remains steady.
Some bubbles may escape while the coolant circuit continues to fill.
Once the bubbles have stopped and the level remains steady, the pump noise should
subside to a quiet whirr.
10.
Replace the black cap on the priming reservoir and tighten gently, but firmly.
11.
If the pump sounds like it is labouring, check that there are no kinks or blockages in
the tubes.
If using a flow indicator, s
ome
bubbles
may get caught in it.
To remove the bubbles, tilt the flow indicator vertically so
that the coolant flows through it i
n the
upward direction.
The bubbles should work their way up and out.