SteelTrak 165 and 210 Installation
Manual
The world’s finest cutting machines
www.keencut.com
+44 (0) 1536 263158
+1 (716) 748 6203
[email protected] (UK HQ)
[email protected] (US sales)
Scan the QR code or
click here to view this document online >
Page 9 of 29
2. Assembly
2.1 Preparing the legs
The first stages of assembly are carried out with the machine laying on the floor
NOTE : When taking the machine from the box, ensure at least
two people are lifting. Remember to bend your knees and keep
your back straight – this machine is heavy.
Be careful when lifting
Slacken the bottom two screws on both legs and extend the
telescopic leg to the desired length. (This can be re-adjusted
later). Tighten the screws to clamp in position.
Once you are happy, swing both legs out as far as they will go.
