SteelTrak 165 and 210 Installation
Manual
The world’s finest cutting machines
www.keencut.com
+44 (0) 1536 263158
+1 (716) 748 6203
[email protected] (UK HQ)
[email protected] (US sales)
Scan the QR code or
click here to view this document online >
Page 19 of 29
2.8 Fitting the back supports
Separate the Supports into left hand and right hand.
The screws fit into special grooves in the underside of the
Supports. The grooves have teeth on their sides to match the
teeth of the screw thread, the screw can be fitted in the groove
anywhere along its length but be careful to make sure the screw
is kept perpendicular to the Support and not screwed in out of line
Place one of the 16 Long Screws in each of the holes along the
legs of the machine, use a 4mm Allen (Hex) Key to fix each
Support in turn ensuring the ends of the Supports are firmly
against the Main Column and the screws are aligned with the
special grooves as explained above.
Fix the end of each Support in position with the Brackets and
short screws as shown.
