Excalibur 3S user guide
The world’s finest cutting machines
www.keencut.com
+44 (0) 1536 263158
+1 (716) 748 6203
[email protected] (UK HQ)
[email protected] (US sales)
Scan the QR code or
click here to view this document online >
Page 9 of 27
The two support plates either side of the blade are designed to
give maximum rigidity of the blade when cutting hard or dense
materials. To adjust the support plates swing down the cutter
guard by undoing the guard locking knob. Turn the turret ½ turn
until blade is pointing towards you.
Unlock the blade clamping screw.
The support plates can be adjusted by sliding the black pin in the
slot. Move the plates to suit the material and tighten the
clamping screw once the support plates are in position.
For cutting most materials the support plates can be set about 12mm (1/2”) from the blade tip
