Excalibur 3S user guide
The world’s finest cutting machines
www.keencut.com
+44 (0) 1536 263158
+1 (716) 748 6203
[email protected] (UK HQ)
[email protected] (US sales)
Scan the QR code or
click here to view this document online >
Page 20 of 27
4.3 Adjusting the sliding bearings
Attach the balance weight (see
) to the other cutting head, hold the cutter at
waist height and place a 2mm hexagon wrench on the top
adjustment screw.
Move the cutting head up and down and tighten the screw very
gradually until the cutting head does not fall under its own
weight.
