Keeler KSL-Z, Инструкция по эксплуатации

Страница: 18 / 26

16
EN
KSL-Z by KEELER
The manufacturer declines any and all responsibility and warranty
coverage should the instrument be tampered with in any manner or
should routine maintenance be omitted or performed in manners not in
accordance with these manufacturer’s instructions.
There are no user serviceable parts in this instrument. Any servicing or
repairs should only be carried out by Keeler Ltd. or by suitably trained and
authorised distributors. Service manuals will be available to authorised
Keeler service centres and Keeler trained service personnel.
9. SPECIFICATIONS AND ELECTRICAL RATINGS
The Keeler Slit Lamp is a medical electrical instrument. The instrument requires special care
concerning electromagnetic compatibility (EMC). This Section describes its suitability in terms
of electromagnetic compatibility of this instrument. When installing or using this instrument,
please read carefully and observe what is described here.
Portable or mobile-type radio frequency communication units may have an adverse effect on
this instrument, resulting in malfunctioning.
9.1 ELECTROMAGNETIC EMISSIONS
Guidance and manufacturer’s declaration – electromagnetic emissions
The Keeler Slit Lamp is intended for use in the electromagnetic environment specifi ed below.
The customer or user should ensure that it is used in such an environment.
Emissions test Compliance Electromagnetic environment – guidance
RF emissions CISPR 11 Group 1 The Keeler Slit Lamp uses RF energy only for its internal
function. Therefore, its RF emissions are very low and are
not likely to cause any interference in nearby electronic
equipment.
RF emissions CISPR 11 Class B The Keeler Slit lamp is suitable for use in a professional
healthcare facility environment. The Keeler Slit lamp is
not intended for use in home environment.
Harmonic emissions
IEC 61000-3-2
Class B
Voltage fl uctuations /
fl icker emissions IEC
61000-3-3
Complies