Next
Home
Back
10
Mute Function
The audible indicator is normally active during freeze
and purge cycles as indicated on the LCD screen.
It can be disabled by simply pressing the key adjacent
to the symbol. The symbol is changed accordingly.
The indicator can be reactivated by simply pressing the
key again (see Section 3 [1]).
Fault Conditions
The Cryomatic system has the ability to detect a range
of system faults. In the unlikely event of a fault
condition arising, the fault symbol icon will flash and a
short error message will be displayed.
Contact distributor or manufacturer for assistance.
End of Use
Ensure that the following procedures are carried out at the end of the
current usage:
1
Close the cylinder valve.
2
Switch off the electrical supply.
3
Ensure that the mains cord, footswitch and the
Cryo-Tip probes are stored properly to avoid
accidental damage.
5. Operation
