PL010
Issue 01
STORAGE
To close the Panel Lifter for storage you must first fold back the
bottom stabilisers. Ensure they are positioned against the lower
stop to allow the ladder to be fully closed.Lower the ladder
sections until fully closed.Pull excess rope through the clutch and
lock the clutch leaving the clip at the top of the ladder, this will
help to keep the rope free of tangle during storage.Coil up the
excess rope and store on the ladder stile in the strap provided.
Never allow the rope to slide through your hands, it will burn you!
REMEMBER
Do not use worn or damaged equipment.
Check fixings, securing pins, and the lifting rope for cuts or fraying.
Check the Clutch is clean and operates properly.
Wear appropriate personal protective equipment, gloves, hardhat and steel toe capped boots.
Follow the 4:1 rule when erecting the ladder.
Always use the bottom stabilisers.
Maintain at least three points of contact when climbing the ladder.
Do not stand beneath the screen whilst it is being lifted or lowered.
Be aware of overhead power cables.
Do not use in high winds.
Max Load is 50Kg for Hoist.
If in doubt ask your Supervisor.
