PL010
Issue 01
Step 7 Step 8
Lock the clutch before attempting to lift the screen
Pull the rope down vertically whilst standing away from the wall.
The clutch will prevent the screen descending.
Step 9 Step 10
Raise the screen to sill level.
Ascend the ladder and push the screen over the window to allow
a second person inside the building to secure the wire ties.
Release the clip.
Step 1 (Lowering) Step 2 (Lowering)
Erect the ladder as described above.
Raise the clip, by pulling on the rope, to about halfway up the
screen. Lock the clutch. Fit the clip to the screen about one third
down from the top as described on above. Descend from the
ladder; take up the slack in the rope.
When the screen is released from inside the building it will hang
clear of the wall ready to be lowered to the ground. Hold the rope
in one hand and take the strain. Gradually release the clutch
lever, this may be used to control the descent of the screen.
Alternatively, fully release the lever and feed the rope hand over
hand to lower the screen.
