HD PTZ Camera User Manual
56
Operation steps are as follows:
1) Select
“
Enable
” and select a number from the dropdown list of
Guard Area
and user can set
only one area at one time. After saving it, user can set another and max 4 areas can be set;
2)
Target Filter
: to set target area. Click “
Edit
” and drag the mouse in the scene to draw a
rectangle. Click “
Stop
” after finishing and drag the slide bar of “Max and Min Target Ratio” (1%
by default). Moving objects over max or below min will not trigger an alarm when they enter the
guard area(s);
3)
Area Setting
: to set area. Click “
Edit
” and click mouse to draw a closed area made up of 3 to
6 points in the scene. Right click or click the starting or end point to close the area, and drag
the slide bar of “Sensitivity” and "Time Threshold";
4) Select linkage type(s), which is/are the alarm output method(s) when an event triggers an
alarm;
5) Set arming duration: the default is 24 hours displaying in blue bar, or user can customize
durations;
Set duration: select a day and put the mouse on a point of the timeline, left-click and drag
the mouse to the right to draw a bright blue color bar, on the top of which shows the start
time and end time; click the color bar to pop up a window for editing the accurate start
time and end time; click "
Save
" to validate setting. It allows several (max 10) durations on
one day and the durations cannot overlap with each other.
Copy duration: click the copy icon
behind the timeline and copy the durations on the
day to one or several other days.
Delete duration: click "
Delete All
" on the top of the timeline to delete all the durations.
Select duration and click "
Delete
" on the popup window or on the top of the timeline to
delete the duration.
6) Click "
Save
" to validate settings.
