HD PTZ Camera User Manual
48
2) Select a direction from the dropdown list of Guard Line Direction, options including "A->", "B->"
and "A->&&B->"; take "A->" as an example, when selecting this direction, only when objects
move from A to B the system will detect and trigger an alarm;
3)
Set "Target Filter", i.e. target area. Click “
Edit
” and drag the mouse in the scene to draw a
rectangle. Click “
Stop
” after finishing and drag the slide bar of “Max and Min Target Ratio” (1%
by default). Moving objects over max or below min will not trigger an alarm when they enter the
guard line(s);
4)
Area Setting
: to set guard lines. Click “
Edit
” and drag the mouse in the scene to draw a guard
line. User can click its starting or end point to adjust its length and angle,
click “
Stop
” to stop
editing and drag
the slide bar of “Sensitivity” to set the guard line’s sensitivity to moving
objects;
5) Select linkage type(s), which is/are the alarm output method(s) when guard line triggers an
alarm;
6) Set arming duration: the default is 24 hours displaying in blue bar, or user can customize
durations;
Set duration: select a day and put the mouse on a point of the timeline, left-click and drag
the mouse to the right to draw a bright blue color bar, on the top of which shows the start
time and end time; click the color bar to pop up a window for editing the accurate start
time and end time; click "
Save
" to validate setting. It allows several (max 10) durations on
one day and the durations cannot overlap with each other.
Copy duration: click the copy icon
behind the timeline and copy the durations on the
day to one or several other days.
Delete duration: click "
Delete All
" on the top of the timeline to delete all the durations.
Select duration and click "
Delete
" on the popup window or on the top of the timeline to
delete the duration.
7) Click "
Save
" to validate settings.
