Storage and Backup
38
5 Storage and Backup
Storage and backup device supported:
♦
Built in hard disk
♦
External USB disk array
♦
External USB DVD rewriter
♦
Refer to Section 2.4 for the installation of built in hard disk.
♦
Disk management functions:
♦
Disk partition
♦
Disk formatting
♦
Set disk partition as recording partition
♦
Disk check
♦
Disk management method:
Select
Main Menu
Æ
Settings
Æ
Disk
to enter the
Disk Management
interface:
Notice:
1: The total number of external disks should not exceed 8, and the total capacity should be greater than 2G and less than
8T. The total number of partitions should not exceed 24, and the capacity of a single partition should be less than 300G.
2: To access multiple USB devices, a USB HUB is recommended (such as ZK-033).
5.1
Disk Management
Disk Management
Operation Method
Partition
Select a disk. A menu appears. Select
Partition
. A built in hard disk has a
maximum of four partitions.
The first partition of the first disk is 10GB by Automatic partition. You can
change it on manual partition. It is recommended this partition should be use
the default configuration as the snapshots and the log is saved in this
partition
Unload
Unload the USB device
Format
Format the selected partition
Set record partition
set a partition as a record partition
Notice: Never remove a USB storage device when it is operating (such as recording, playing and backing up).A
