NVR Installation Guide
22
For initial configuration, it is recommended that network configuration be made first, and other settings
may be conducted after the buildup of the surveillance system.
Configuration information:
Parameter
Description
NVR No.
If a number of NVR are used, please set the NVR No. from 0 to 8.When it is 8, the
NVR can be directly controlled by the remote control.
System time
Set the time of the NVR.
IP address
Set the IP address of the NVR.
Subnet mask
Set the subnet mask.
Default GW
Set the gateway of the NVR.
Enable auto
networking
In this condition, you check the box:
NVR and video units are in the same LAN, and the number of video points does not
exceed 16 and there is only one NVR.
Thus, you implement auto networking without adding camera manually.
For a dial-up network or device placed in different LANs, you shouldn’t check it.
Refer to Chapter 3 for network configuration.
For a dial-up network or NVR with the use of DDNS, network information may not be set for the time
being. For detailed configurations, refer to related network configuration sections.
2.6
Configuring Video Source Device
The video unit, such as KDM2300 adapter, has initial network settings. For its availability in the
surveillance system, the network settings may be changed according to the actual network conditions.
For details, refer to the appendix.
