Network Configuration
28
networking
Packet Lost Resend
After enabled, lost video packets will be retransmitted.
Enable DHCP
NVR worked as a DHCP server, and dispatch IP address to the video unit
which use DHCP
3.2
Dial-up Network Settings
Parameter
Description
Enable PPPoE
Enable dial-up function;
Dial-up username
Internet access username provided by the ISP;
Dial-up password
Internet access password provided by the ISP;
Auto dial-up
Auto dial-up after network disconnection. This check box is recommended
to be selected; otherwise you have to reset the NVR in case of network
disconnection;
waiting time
Waiting time for dial-up each time;
Retry times
The count of auto dial-up tries when failure connection.
If the NVR accesses to the surveillance network in form of domain name over a PPPoE network, the
DDNS service must be enabled, you need to set DDNS parameters.
3.2.1 Dynamic Domain Name Server (DDNS)
After proper setting of the PPPoE parameters, enter the
DDNS Parameters
interface from the NVR
Network Parameters
interface:
1
）
Enable DDNS service
（
enter the DNS server first, Refer to DNS server parameters in Section
3.1
）
2
）
Configure DDNS server
3
）
Enter the passport and password
3.3
System service
Parameter
Description
Enable auto
networking
If this option is selected, the NVR search the device and add it automatically.
