Video device Management
31
4 Video device Management
Video device means video encoder, IP Camera and decoder.
The NVR supports flexible networking, as well as auto and manual networking.
Notice: After networking, when you log on to the NVR Station to browse videos in local login mode, please make
sure that the smooth network connection between the visitor and the Encoder, for example, the configuration of such
information as route or gateway.
4.1
Automatic Networking
If there is only one NVR over the network and it is in the same LAN as all video units, after the auto
networking function is enabled, the user can implement auto networking without adding Manual.
Enable auto networking:
♦
Main Menu
Æ
Settings
Æ
Network
♦
Or Settings
Æ
Wizard/Network Settings
Select
Enable Auto Networking
on the open window.
Notice: Upon auto networking, please make sure that all devices involved are powered on and normally
connected to the network.
4.2
Add Video device
If the number of surveillance sites exceeds 16 and two or more NVR are deployed over the surveillance
network, please take the manual networking mode.
1
）
Select
Main Menu
Æ
Devices
or
Wizard
Æ
Networking
Æ
Devices
. An interface appears.
Click related functional button to enter related interface.
2
）
Click
add device
, and enter the IP information to conform;
3
）
Or click
search device,
and select the device in the list, then click
add device
in the open
windows.
After the device is added to the NVR, a camera ID is dispatched automatically which is unmodified, and
the ID indicate the relationship between the video and the monitor when a keyboard control the TV wall.
Notice: If the video device cannot be found but the device is online actually, check the address of the platform
which the video unit is added to is correct. Please refer to the appendix for the video device registration address.
