HD Mini Dome Camera User Manual
58
Picture 5-34 Positioning
Configuration steps are as follows:
Zero Correction
When the PTZ position fails to synchronize with the positioning or user wants it to
return to the zero position, zero correction can be performed. After zero correction,
camera will return to the mechanical zero position automatically. Click “Pan/Tilt Zero
Correction” to perform.
Positioning
Present Coordinates: show the coordinates of current PTZ position.
Horizontal Coordinate:
fill the target horizontal coordinate and click “Horizontal
Positioning”, then the PTZ will rotate to the target pan position.
Vertical Coordinate: fill the target vertical
coordinate and click “Vertical
Positioning”, then the PTZ will rotate to the target tilt position.
Azimuth Positioning: it means the PTZ camera faces to the due north. Rotate the
camera to a specific position and click
“Azimuth Positioning”. Save this position
and set it as the due north direction.
Note: After azimuth positioning is set, the live direction of the camera can display on
live view interface. Go to
Settings > Camera > OSD
, and select “PTZ”.
