HD Mini Dome Camera User Manual
32
Note: There are 64 DSCP priority levels (0-63), which identify different priority levels
of packets, 0 with the lowest priority and 63 with the highest. Select and keep
packets according to their priority levels. Different levels occupy different
bandwidths with different packet loss rates during network congestion, thus
the quality of service is ensured.
Attention: You need to configure the same value on the router.
3) Click "
Save
" to validate setting.
4.3.7
UPnP
By UPnP protocol, it is able to set up mapping relation between private network and the
internet. Internal port is camera port while external port is router port. User can visit
camera when accessing to the external port. Configuration steps are as follows:
Note: For a camera in an Ethernet, UPnP function can make gateway or router
perform auto-port-mapping which maps the camera monitor port from
gateway or router to the Ethernet device, thus the firewall module on the
gateway or router starts to open this port to other PCs on the internet.
1) Go to
Settings > Network > Other Protocols > UPnP;
Picture 4-14 UPnP
2)
Select “Enable” to enable UPnP function;
3) Set alias, then user can search the alias directly from the network on PCs which
have enabled UPnP protocol in the broadcast domain of the same Ethernet.
Double-click the icon and the system will pop up a page automatically for user to visit
current IP address;
4)
Select "Auto" or "Manual" for Mapping Mode. When selecting “Manual”, enter
external port number manually;
5) Click "Save" to validate setting.
4.3.8
SNMP
SNMP means Simple Network Management Protocol. It is an application level protocol
consisting of a set of network management standards that support a network
