P30
Update via USB
Firmware Update Instructions V1.02
11
© KEBA
4
Update via USB
The following steps are necessary for an update via USB:
●
Remove covers
●
Perform update
●
Mount covers
4.1
Remove covers
The USB interface is located in the connection panel of the charging station.
To make the USB interface accessible, the housing cover and the connec-
tion panel cover must be removed. Proceed as follows:
1) Unscrew the two screws on the bottom of the housing
cover
1
.
2) Lift the housing cover at bottom max. 1 cm
1
and then
push upwards
2
.
3) Unscrew the four screws of the connection panel cover
1
and remove the connection panel cover upwards.
