KC-P30
Connections and wiring
Installation manual V3.28
38
© KEBA
Category
Wire diameter
Insulation diameter
Cat 6 STP
0.51 – 0.81 mm
(AWG 24 – AWG 20)
1.0 – 1,4 mm
Flexible cable
Cat 5e / Cat 6 STP
7 x 0.2 mm
(AWG 24)
1.1 – 1.4 mm
Preparing the connection cable
To prepare the connection cable, proceed as follows:
1) Strip the connection cable about 6 cm.
2) Knock back approx. 1 cm of shielding all over and wrap with conductive
textile adhesive tape.
Connecting the cable
To connect the cable, proceed as follows:
1) Fix the connecting cable at the point of the wrapped-around shielding
braid in the shield clamp
[K]
.
2) Tighten the shield clamp.
3) Clamp the wires to the terminal block
[ETH]
using an insertion tool.
