D3-DA 3xx/x
Introduction
Project engineering manual V1.07
9
© KEBA
1
Introduction
1.1
Purpose of the document
This document describes the structure of the axis module D3-DA 3xx/x.
Information
This manual is not addressed to end customers! Necessary safety notes for
the end customer have to be taken into the customer manual in the respec-
tive national language by the machine builders and system providers.
1.2
Preconditions
This document contains information for persons with the following skills:
Target group
Prerequisite knowledge and abilities
Safety engineer for "Func-
tional Safety"
Basic technical training (technical college, engineer training or
corresponding professional experience).
Knowledge about:
●
principles of functional safety,
●
relevant standards and safety regulations for the machine/
system, particularly knowledge about validation according
to EN ISO 13849-2,
●
special risk potential of the machine/system and the pro-
duction process,
●
specific protective measures to avert machine-specific haz-
ards (based on hazard and risk analysis),
●
functioning and application limits of the safety components
(including safety PLC),
●
in-depth knowledge of national accident prevention regula-
tions.
Project engineer
Basic technical training (technical college, engineer training or
corresponding professional experience).
Knowledge about:
●
current valid safety regulations,
●
fundamental validation concepts according to EN ISO
13849,
●
method of operation of a PLC,
●
the application.
Содержание D3-DA 3 Series
