KEB DYNAMIC LINE III, Инструкция по эксплуатации

Страница: 28 / 60

28
OPERaTING cONDITIONS
3.2 Test flange for thermal determinations
The rated power (rated torque) applies for continuous operation (duty type S1) at ambi-
ent temperature of 40°C and site altitude of up to 1,000 m above sea level.
Motor type Material Dimension of the test flange in mm
0xSMH Aluminium 230 x 130 x 10
AxSMH Steel 225 x 80 x 10
BxSMH Aluminium 230 x 130 x 10
CxSMH Aluminium 230 x 130 x 10
DxSMH Aluminium 305 x 305 x 12,7
ExSMH Aluminium 380 x 170 x 10
FxSMH Steel 375 x 601 x 10
Table 3: Dimensions and material of the test flange
If the motor flange is thermally insulated, it is not able to dissipate the motor
heat. This requires a reduction of the rated motor torque.
3.3 coolant temperature at different site altitudes
At higher temperatures or site altitudes, the load capability of the motors is reduced (see
the following table).
altitude above
sea level in m
coolant temperature in °c
<30 30...40 45 50 55 60
1000 1,07 1,00 0,96 0,92 0,87 0,82
1500 1,04 0,97 0,93 0,89 0,84 0,79
2000 1,00 0,94 0,90 0,86 0,82 0,77
2500 0,96 0,90 0,86 0,83 0,78 0,74
3000 0,92 0,86 0,82 0,79 0,75 0,70
3500 0,88 0,82 0,79 0,75 0,71 0,67
4000 0,82 0,77 0,74 0,71 0,67 0,63
Table 4: Coolant temperature
caUTION
High surface temperatures !
Fire and burn protection
► The motors can reach a surface temperature of more than 100°C.
► No temperature-sensitive parts shall be connected or fastened.
If necessary, protective measures must be taken against touching.