KE 4256-5492 Keatec T Series 10-20kVA PF1.0 208Vac with Internal Battery 7.0 Touch Screen Users Guide English 20181118
This manual is for qualified personnel only
Page 34
5
Optional cards – SNMP / Relay
SNMP card
: internal SNMP / external SNMP optional
1) Loosen the 2 torque screws (on each side of the card).
2) Carefully pull out the card.
Reverse the procedure for re-installation
The slot called SNMP supports the MEGAtec protocol.
Note: NetAgent II-3 port is also a tool to remotely monitor and manage any UPS system
NetAgent II-3Ports supports the Modem Dial-in (PPP) function to enable the remote control via the
internet when the network is unavailable.
In addition to the features of a standard NetAgent Mini, NetAgent II has the option to add NetFeeler
Lite to detect temperature, humidity, smoke and security sensors. NetAgent II also supports multiple
languages and is setup for web-based auto language detection.
Typical topology of the UPS Network Management
Relay card
A 10-pin terminal is supported to offer the signals of Bypass, Utility Failure, Inverter On,
Battery Low, UPS fault, UPS Alarm, and UPS Shutdown.
The relay communication card contains six dry contact outputs and one dry input. The inputs
and outputs are factory programmed according to functions listed in the table
Table: Relay Contacts (communication card)
