２
Lithium pile LCD balance charger & discharger
KDS POWER RC-6S
Manual
A.Specifications:
Operating voltage range: DC 11.0- 16.0V
AC 100- 240, -50/ 60 HZ 12V DC 5A adaptor
Max. charge power: 50W
Max. discharge power: 5W
Charge current range: 0.1-5.0A
Discharge current range: 0.1-1.0A
NiCd \ NiMH battery cell(s): 1-15cells
li-ion \ Polymer cell(s): 1-6 series ( Note: support Li-Fe battery, i.e. A123)
PB battery voltage: 2-20V
B.key-press function
Batt. Type / Stop button: button for battery type and stop, with this button you can switch in main
menu after connecting electricity. During charging, you may stop it by pressing this button at any
moment;
Dec. / Inc. < Status > button: button for decrease and increase, when setting various value,
Dec.
is to decrease, while Inc. is to increase, during charge, press these two buttons to browse different
information for battery;
Start / Enter button: button for start and confirm.
C. Operating explanation
Turn on power, main menu will be displayed immediately
Then you can press Batt. Type / Stop button, switch among the main menus, they are as follows:
1)
Program Select
LiPo Batt
Main menu for charge or discharge for LiPo battery series
2)
Program Select
NiMH Batt
Main menu for charge or discharge for NiMH battery
3)
Program Select
NiCd Batt
Main menu for charge or discharge for NiCd battery
4)
Program Select
Pb Batt
