5
discharge current is 1A at most
⑵
NiMh battery charge or discharge
1.
)
charge
In main menu press Batt. Type / Stop button to choose:
Program Select
NiMh Batt
This is NiMh battery charge mode, press Start / Enter button, and the screen will display:
NiMh Charge Man
Current *.*A
Press Dec. < or Inc. > button to change the value, this is to choose charge current, normally it is
better to choose 1C
~
1.5C current to charge on battery.
Change forced charge current and the control for automatic charge current
NiMh Charge Man
Current *.*A
Charge current choice interface before this, default is charge current by hand, i.e. back is Man
typeface. Under this charge method, charger will work as per the charge current you set up, that is
to forcedly use the charge current you set up, which is not recommended, so
KDS POWER RC-6S
can be also changed to automatically charge current control.
Method to change:
In the interface of choosing charge current:
NiMh Charge Man
Current *.*A
Press Start / Enter button
,
and the current figure of charge will glitter. Press Dec.and Inc. at the
same time for 0.5s
,
and it will change into automatic charging current control, the display of the
screen is
:
NiMh Charge Aut
Cur Limit *.*A
If you change the state of the figure which is glittering, it is the peak value current when charging
now. It would be thought as the maximal control of charging current, the charger will control the
current automatically, but it won’t exceed the figure you set.
Press Start / Enter for a long time after setting the current
,
display
:
Battery Check
Wait…
It will show the following figure if the battery and the connecting have no problem..
NiMh *.*A *.*V
CHG ***.** *****