３
Main menu for charge or discharge for Pb battery
5)
Program Select
Save Data
Menu for saving data
6)
Program Select
Load Data
Menu for loading data
7)
User Set
Program->
Menu for user program
⑴
Lithium battery charge or discharge
1.) Charge
Main menu will be displayed after start machine
Program Select
LiPo Batt
Press Start / Enter button to confirm
Screen display
LiPo Charge
*.*A *.*V(*S)
This is lithium battery charge, not balance charge. ( apply to lithium battery without balance
connector)
Press Inc. >, screen display:
LiPo Balance
*.*A *.*V(*S)
This is the balance charge function of lithium battery, what we often use for model is balance
charge, so you should operate here, as follows:
Press Start / Enter button, the figure before A will glitter
Press Dec. < or Inc. > to change the value, this is choice for charge current, lithium polymer
battery can’t excess 1c, i.e. 4400mzh battery chooses 4.4a at most, while 2200mah battery 2.2a at
most, analogy in this way; 0.5c is recommended to choose i.e. 4400mah battery choose 2.2a, the
rest may be deduced by analogy
Dec. < decrease the value, Inc. > increase the value
Press Start / Enter button, the figure before V(*S) glittering
Press Dec. < or Inc. > to change value, this is to choose battery rating voltage, multiple of 3.7, it
usually is 7.4v for car-use battery, i.e. 2S (each 3.7v=1S)
press Start / Enter button for long time, the following screen will appear:
Battery Check
Wait…
