17
LiPo FAST CHG
2.0A 11.1V (3S)
D E C
I N C
D E C
I N C
Batt Type
Stop
Start
Enter
‘>3 seconds’
R:3SER S:3SER
CONFIRMC(ENTER)
Li3S 2.0A 12.59V
BAL 022:43 00682
Number
of cells
Elapsed
time
Supplied
capacity
Charged
Voltage
battery
Charging
current
Storage control of lithium battery
This function is for charging/discharging batteries which are not used at once. This
program is designed for charging or discharging of batteries of specific original state.
They are classified by types:3.75V LiIo,3.85V LiPo and 3.3V LiFe. The program will begin
to discharge if the original state of the battery exceeds voltage level of storage.
Fast charging of Lithium battery
Charging current will become lower when it progress to the end
of charging. A specific CV process will be reduced to end the
charging process earlier. In fact, the charging current will goes
to 1/5 when the charging process comes to 1/10. Charging
capacity will be a little smaller than normal charging, but
charging time will be shortened accordingly.
You can set up the charging current and voltage of the battery
pack. Press START/ENTER key to display voltage confirmation.
Then press START/ENTER key again to confirm and begin to
charge.
This screen shows the real-time status of “fast charging”. Press
BATTTYPE/STOP key once to stop the charge process.
Fast charging of Lithium battery
