![background image](http://html1.mh-extra.com/html/kbt/261-020-010-001/261-020-010-001_instructions-for-use-manual_3774372003.webp)
18
ASSEMBLY - MONTAGE - MONTAJE - MONTAGGIO - MONTA
Ż
9
11
11
9
13
13
17
17
13
13
17
17
3
Instructions for use - M26x.02 - seesaw
seesaw
INSTALLATION
To be conform with the standards EN 1176-1:2008 and EN 1176-6:2008, the product needs to be assembled res-
pecting the correct dimensions and distances as shown below in the drawing and the table.
center of the seat
height: max. 1500 mm
when level
height of the seat: max. 1000 mm
500 mm
resulting angle
14°
10°
8°
90
955
-
-
100
965
962
-
120
984 981 979
140
1004
1001
999
180
1043 1040 1039
600 mm
resulting angle
18°
13,5°
11°
90
1159 1155 1152
100
1168 1164 1162
120
1187 1184 1182
140
1206 1203 1201
180
1244 1242 1241
700 mm
resulting angle
x
17°
13°
90
x
1357
1354
100
x
1367
1364
120
x
1386
1384
140
x
1405
1403
180
x
1443
1442
distance bottom beam-ground level
dimensions beam (mm)
fall height (mm) - max. 1500
x = not in accordance with EN 1176-6
# 261.020.020.001
beam lenght
3 m
4 m
5 m
# 261.020.010.001
Table: Resulting angle and height for a few possible setups.
Ø 140 - 180 mm
90 - 120 mm
(1) hinge: center of beam
(2) hand grip/seat: close to each other
(3) softener : end of beam
ASSEMBLY LOCATION OF THE DIFFERENT PARTS
Check after the installation that the lateral deviation, measured at a distance
of 2000 mm from the axis point, does not exceed 140 mm.
2000
max. 140
(1)
(2)
(3)
max. 20°