manualshive.com logo in svg

KBR multimess F144-2-LED-ESMS 4 Series, Руководство пользователя Технические параметры

Поделиться
Скачать
KBR multimess F144-2-LED-ESMS 4 Series Скачать руководство пользователя страница 14

Rev. 3.00

22067_EDEBD

A0239-3617-3_EN

14

KBR multimess F144-2-LED-ESMS...-4

  

CAUTION

The control voltage as well as the applied measuring voltage of the device must 
be protected by means of a back-up fuse.
When connecting the current transformers, pay attention to the energy fl ow 
direction and the correct assignment to the voltage paths!

Power supply: 

The electrical installation of the building must have a disconnec-

tor or circuit-breaker for the power supply voltage.
The disconnector must be close to the device and be easily accessible to the 
user.
It must be marked as an isolating switch for this device.
The isolating switch must be UL/IEC-approved.

Voltage measurement:

The disconnector must be close to the device and be easily accessible to the 
user.

It must be marked as an isolating switch for this device. The isolating switch 
must be UL/IEC-approved.

  

CAUTION

Do not apply DC voltage to the voltage measurement input.

  

CAUTION

The device is not suitable for DC voltage measurement.

  

CAUTION

Attach the current transformer terminal to the device with two screws.

  

CAUTION

Never operate open external unloaded current transformers. Always short-
circuit them. Risk of injury from high voltages and currents.

Installation and electrical connection

Содержание multimess F144-2-LED-ESMS 4 Series





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды