21
1
2
Operation and Service megaSun 7900
5.6
Unit lighting
Replacing the
lighting system in
the canopy
The lighting system is made up of 4 tubes of 58W each.
• a white tube in the lower front section,
• a coloured tube above in the canopy matching the design
colour
• and two tubes for the interior (in the canopy and the
back).
The starters for the tubes are in the left socket of each tube.
They have to be replaced if necessary.
• Remove the end metal covers on the right and left of the
handle rail. Undo the screws of the aluminium traverse
and tilt it up. (Illustr. 5-17)
• Slightly lift the inserted element (loosen the velcro
fastening).
• Pull out the inserted element (Illustr. 5-18).
Aluminium
traverse
End metal
cover
Illustr. 5-17 Opening
the canopy
Illustr. 5-18 Lifting and pulling out the
inserted element
Exchanging the
unit lighting in the
interior
These tubes are located behind the tanning tubes.
• Open the acrylic pane of the canopy or of the back
• Remove the tanning tubes
• Exchange the corresponding tubes and if necessary the
starters at the left socket as well.
Exchanging the
unit lighting in the
front section
• Hang the base pane onto the bolted, open canopy.
• Loosen the bolting of the lower part of the bed and tilt up
the bed (Illustr. 5-20 .... Illustr. 5-22)
• Now you can change the tube. If necessary, take the
opportunity to exchange the starter (at the left socket) as
well.
Содержание megaSun 7900
