KBL megaSun 7900, Руководство по эксплуатации и обслуживанию

Страница: 16 / 60

16
Sqaure bolt Bar
Operation and Service megaSun 7900
Illustr. 5-6 Placing the key Illustr. 5-7 Bar of the bed frame
Closing the base
pane
After cleaning the base pane, close it again. Make sure that the
duct pane is in the
correct
position.
Step Procedure Reference
1. Open the canopy, bolt it. see 5.1
2. Undo the two pan-head screws of the base pane.
Always make sure that you take the pane in the middle
and use the hook to hang the pane onto the
fi xed
canopy.
3. Take out the duct pane and lay it down in a safe place.
4. Open the bar to lift the complete base case, if
necessary. Illustr. 5-6
5. In the centre of the lower front cover there is a square
bolt. Place the enclosed key onto this square element. Illustr. 5-7
6. Unlock the bed by turning the key anti-clockwise. By
doing so, the bed will slightly go up.
Step Procedure Reference
1. If you have opened the bolt of the base case, re-bolt it
again:
Turn the key in the middle of the lower front cover as
far as possible clockwise. The bed is drawn to the
base part and is bolted
fi rmly again.
2. Place the duct pane back into its place and make sure
that it is in the correct position
3. Release the base pane and tilt it down, fasten the
pane with screws.