KBL megaSun 7900, Руководство по эксплуатации и обслуживанию

Страница: 10 / 60

10
Operation and Service megaSun 7900
Facial tanners
Level II Once the tanning program has been started, the facial
tanners are switched on automatically at maximum
setting.
Level I To reduce the output to level I, use the fi eld “–”.
Level 0 To switch off the facial tanners completely, touch the “–”
fi eld again for at least 3 seconds.
By touching the “+” fi eld you can switch the facial tanners on
again or you can increase their output.
When the system has been switched off, there will be a time lag
before you can switch it on again due to the necessary cooling
of the burners.
Body fan
The power of the body fan can be increased or reduced by
steps of 10 % by touching the
fi elds „+“ or „–”.
After being switched on, the fan starts running at the power-level
value that has been entered for ACS/A.START on level II of the
service menu.
When changing the value, the current setting is displayed
as a two-digit number between “20%” (minimum) and “99%”
(maximum) in the numerical
fi eld for a short time.
In order to switch off the body fan completely, press the “
−
" fi eld
several times until the value of 20% appears. Then press the "–”
fi eld once again and keep the key pressed for 0.5 seconds. After
a short time lag the body fan is then switched off.
The body fan can be switched on again at any time simply by
touching the “+”
fi eld.
Channel selection
With the help of this system you can choose the audio source,
e.g. change the CD or go to the next piece of music (MP3).
The MP3-player is equipped with a 256MB-chip, which can take
the volume of the 3 music CDs.
The MP3-player is designed in such a way that you only have to
change the chip for the music. As an optional feature, the music
of the MP3-player can be turned on during the tanning breaks.
Tip: The music of the MP3-unit can only be controlled by one
4.2.1 First sub-menu