background image

2

1

1

1

2

21

Operating Instructions KBL 7900/KBL 7000/KBL Convertible

Illustr. 5-10 Dismantling the 
tube cover 

Illustr. 5-11 Dismantling the 
fi lter pane frame 

Cleaning

For a harmless cleaning of the fi lter panes use the special 
cleaning and disinfectant fl uid „ megaClean  “ which has to 
be diluted in water in a ratio of 1:13.  Or use a normal glass 
cleaning agent with a soft cloth or a chamois leather.

5.4   Tubes and  facial tanners 

Dismantling

In order to clean or replace the tubes and facial tanners, please 
proceed as follows:

Cleaning intervals 

To make sure that the tanning effect is maintained, we 
recommend you to clean the tubes and UV radiators with warm 
water and a chamois after approx. every 200 hours of use. Do 
not use any aggressive or alcoholic cleaning agents.

Tubes in the 

 shoulder tanner 

The shoulder tanner „activeFlex“ is equipped with 7 tubes of 
25 W each. In addition, the loudspeakers are located in this 
element. 

Step

Procedure

Reference

1

Completely dismantle the acrylic panes. 

Section 3.2

2

Remove the tube covers in the facial area. 

Section 3.3.

3

In 

apparatuses equipped with burners

  you will have to 

dismantle the fi lter panes as well

Section 3.3.

4

Tilt up the base pane.

Section 3.2

Содержание megaSun 7900



























































Отзывы: