KBL MegaSun 7000a, Руководство по эксплуатации

Страница: 37 / 52

O p e r a t i n g I n s t r u c t i o n s | megaSun 7000/7800 alpha
37
TUBE ARRANGEMENT
HYBRIDSUN UND BEAUTYSUN DEVICES
Only for de-
vices with 50
tubes
Hurricane or collagen - canopy/side tube
UV - canopy/side tube
UV - bench tube
Air nozzle or LED-Booster
Front Rear
Hurricane or collagen - bench tube
TUBE REPLACEMENT IN THE BENCH PART
⑥
⇒
Open the bench pane.
⑥
If the tanning device is equipped with an air-
conditioning unit, remove the ducting pane.
⇒
Remove the tubes.
TUBE REPLACEMENT CANOPY / SIDE PART
⇒
Tilt the canopy and / or side pane down.
⇒
Remove the tubes.
Filter cartridges
↵
The cooling air for canopy and bench is filtered.
Your tanning device is equipped with filter cartridges
and continuous-service filter inserts. Therefore,
purchase and replacement of conventional filter
pads are not required. Clean the filter inserts after
approx. 100 hours of operation, depending on the
local circumstances. Vacuum the filter inserts or
use a dishwasher.
Bench
Canopy
There are four filter cartridges each in the canopy
and in the bench part.
NOTE
Take the opportunity and check and clean the
heat exchangers of the air-conditioning unit (See
also the chapter “Maintenance/Ventilation and air-
conditioning”). Soiled heat exchangers substantially
reduce the performance of the air-conditioner.
FILTER CARTRIDGES IN THE BENCH PART
⑦
⇒
Open the bench part.
⑦
Open the lock of the filter insert.
⇒
Remove the filter insert.