O p e r a t i n g I n s t r u c t i o n s
|
megaSun 7000/7800 alpha
35
Maintenance by staff
Maintenance tasks for “staff” are
described in these instructions! The
description of maintenance tasks that
must be carried out by “qualified,
trained and authorized service techni-
cians” is found in the “
Maintenance &
Service” documentation.
Tools and aids
4
Hexagon socket screwdriver
(SW 4 / 60 mm)
↵
Finally acknowledge a process by pressing
the Start button (interior control panel).
Number of required staff for this mainte-
nance task.
The following chapters describe the work steps
required for carrying out maintenance and care
actions.
At the beginning of each chapter, the required tools
and aids are depicted.
The assembly is basically carried out in
reverse order of the disassembly.
Exceptions are especially pointed out.
If you open the bench part or one of the
acrylic panes, you must, after closing,
acknowledge a warning message appear-
ing on the interior control panel.
Unlocking the bench
↵
Attention!
The bench must only be opened with
bench pane folded down.
①
②
②
①
Press the bench slightly downwards and
keep it pressed.
②
Open the lock.
⇒
Tilt up the bench.
Acrylic panes
TILTING UP THE BENCH PANE
↵
③
④
④
③
Hold the bench pane in the middle of the
front edge and lift it.
④
Lock it in place using the lateral support
plates.
Содержание MegaSun 7000a
